10,000 Watt Automatic LP/Natural Gas Generator with 100 Amp Automatic Transfer Switch
10,000 Watt Automatic Propane/Natural Gas Generator with 100 Amp Automatic Transfer Switch - Starts automatically when your power fails and transfers your electrical loads to generator power. When utility power returns, the system transfers back to utility power and shuts off the generator.
Includes weather protective enclosure, composite mounting pad (for easier installation), flexible fuel line connector to your propane/natural gas pipe, automatic transfer switch with 16 circuits and step-step installation guide with colored photographs.
This 10,000 watt generator features an OHV 460cc propane or natural gas engine, spin-on oil filter, low oil pressure shutdown, high water temperature shutdown, automatic voltage regulation, enclosed critical grade muffler, timed battery trickle charger, automatic 100 amp transfer switch with seven day exerciser and direct-to-dirt composite mounting pad.
Generator
Automatic Voltage Regulator
Standard
Main Line Circuit Breaker
35 Amps
Power Single-Phase
---
Maximum Output
10,000 watts
Continous Output
9,000 watts
Load Amperage at 120 volts
---
Maximum Load
83 Amps
Continous Load
75 Amps
Load Amperage at 240 volts
---
Maximum Load
41.6 Amps
Continous Load
37.5 Amps
Sound Level @ 23 ft(7 m)
61 dB(A)
Engine
Type
460 cc
Cylinder Block
Aluminum w/ Cast Iron Sleeve
Cylinders
2
Governor System
Electronic
Oil Capacity w/ Filter
Approx. 1.1 Qts
Battery Requirement (Not Included)
12 Volts, Group 26R 540 CCA Minimum
Fuel
Propane or Natural Gas
Cooling System
Air-cooled
Battery Trickle Charger
Standard
Starting System
Electric
Consumption
Consumption at 1/2 load - gal/hr (cu.ft/hr)
0.97 (36)
Consumption at 3/4 load - gal/hr (cu.ft/hr)
1.23 (45)
Consumption at full load - gal/hr (cu.ft/hr)
1.48 (54)
Transfer Switch
Current Rating (Amps)
100
Voltage Rating (VAC)
250
Weekly Exercise
Standard
UL Listed
Standard
16 Circuits
Standard
NEMA 3R Aluminum Enclosure
Standard
Dimensions
MLS4-Y
Height
30.1"
Width
13.5"
Depth
6.91"
Controls
Engine Warm-Up
Standard
Maintenance Indicators
Standard - LED
Battery Trickle Charger
Standard
Low Oil Pressure Shutdown
Standard
High Temperature Shutdown
Standard
Overspeed Shutdown
Standard
Plain Text LCD Display
Standard
Installation Data
Fuel Inlet Fitting
3/4" FNPT
Fuel Inlet Pressure
Nat. Gas: 3.5-7" Propane: 11-14"
Recommended Hose Size
3/8"
BTU Content
135,000 BTU
Flexible Fuel Line
1'-3/4" NPT Fitting
Recommended Clearances
5' - All Sides
Composite Mounting Pad
Standard
No. of Conductors
4
Wire Size of Conductors
No. 4 AWG
Service Side (Facing fuel inlet)
Left-Side
Exhaust Location & Direction (Facing service side)
10,000 Watt Automatic LP/Natural Gas Generator with 100 Amp Automatic Transfer Switch
